HomeMate Wi-Fi RGBIC LED KIT 5 Mtr – HomeMate

What you need to get started

HomeMate Wi-Fi RGBIC LED KIT 5 Mtr.
Phone must be connected to 2.4 Ghz WiFi network only (and not 5 Ghz).
Location should be ON.
Mobile Bluetooth should be ON.

Download app and Register account

Download HomeMate Smart App from App Store or Google Play.

- Use link to download HomeMate Smart app - https://a.smart321.com/homematesmart

- You can scan the QR code below to download the HomeMate Smart App：

You can also search “HomeMate Smart” in either App Store or Google Play to install the App.

2. Open App and register your account.

3. Create Home in Home Management Setting.

4. Set location.

Connection Instructions for HomeMate Wi-Fi RGBIC LED KIT 5 Mtr

For 5 meter kit, connect LED strip to the output from the smart controller. Ensure arrows marked aligned to each other same as below.
Connect Adapter to DC Power Input in the controller.
Connect Adapter to Power Supply.

Pairing of Wi-Fi RGBIC LED KIT 5 Mtr with HomeMate Smart app can be done through 2 process flow in app. If Process 1 fails, try Process 2 :

Process 1: Auto-detection using Bluetooth

Steps to connect HomeMate Wi-Fi RGBIC LED KIT 5 Mtr with HomeMate Smart App

Install the HomeMate Wi-Fi RGBIC LED KIT 5 Mtr to its place and give electrical connections.
Connect your mobile with home Wi-Fi(2.4Ghz).
Bluetooth and location must be On.
Open the HomeMate Smart App.
Tap '+' at the top right corner or 'Add device' button on the Home screen.
It will automatically show the nearby device ready to be paired.
Tap on "Go to add"
Tap '+' at the top right corner to add the device.
Enter Wi-Fi Password then tap on "Confirm".
It will connect to the HomeMate Wi-Fi RGBIC LED KIT 5 Mtr.
After adding you can edit the name of the HomeMate Wi-Fi RGBIC LED KIT 5 Mtr.
Tap on pencil mark located after Smart LED Strip.
Type the desired name like "Bedroom Lighting" tap on "Save" then tap on "Done" located on the Top right corner.

Process 2: Using Search device Wi-Fi process flow:

Steps to connect Smart RGBIC LED Strip with HomeMate Smart App

Install the HomeMate Wi-Fi RGBIC LED KIT 5 Mtr to its place and give electrical connections.
Connect your mobile with home Wi-Fi(2.4Ghz).
Bluetooth and location must be On.
Open the HomeMate Smart App.
Tap '+' at the top right corner or 'Add device' button on the Home screen.
Select Smart LED.
Make sure that Smart RGBIC LED flashes and then tap "Confirm indicator rapidly blink" to go to next step, If the LED is not flashing, then try to switch turn on and off the adapter supply for 6-7 times.
Select Wi-Fi 2.4Ghz and type the password then tap on "Next"
Add successfully message appears once device is connected.

Warm Tips for Smart LED Strip:

The connector between the Smart controller and LED strips must be connected towards matching arrows.
Please ensure connection of all parts well before you plug in the power supply, otherwise it will take risk for the light strip burn.
Switch LED Strip 4 times power ON/OFF from manual switch to reset the device and bring it in pairing mode.

Specifications of HomeMate Wi-Fi RGBIC LED KIT 5 Mtr:

1. 16 Millions Colour (RGB), 60 LEDs/meter

2. Length-5 Mtr, Width- 10mm

3. Contents- 1x WB11 LED strip roll, 1x Smart Controller & 1x Adapter.

4. Wireless Type: 2.4GHz, BLE (Bluetooth)

5. Scheduling, Timer, Scenes, Family Sharing

6. Last State Memory

7. Music Sync, Grouping.

8. Application- Cove Lighting

Legal Disclaimer:

Loss or damages resulting from un-authorized adaptations/adjustments/tampering/improper installation of the product are not covered. Also, Accidental/Physical/Water damages and damages due to High Voltage burnouts are out of the purview.

Important links:

For Alexa linking process, click here.

For Google Assistant linking, click here.

For whatsapp support, click here

HomeMate HomeMate Wi-Fi RGBIC LED KIT 5 Mtr purchase links: Website - Click here and Amazon - Click here

For any issue or query, mail us at support@homemate.co.in or call +91-844-877-2158 between 10 am to 6 pm.